DETAILS OF LIMESTONE GRAVEL PRODUCTION LINE WITH 500-550 TONS PER HOUR
DESIGN OUTPUT
500-550TPH
MATERIAL
Coarse, medium and fine crushing of medium and soft rocks such as limestone, dolomite, marl, tuff, sandstone and clinker
APPLICATION
Chemical, cement, construction, refractories and other industrial sectors for coarse crushing, medium crushing and fine crushing of all kinds of medium hardness materials.
EQUIPMENTS
Vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor
BASIC PROCEDURE
First blasting down from the mountain stone through feeder evenly feeding jaw crusher preliminary broken, after coarse crushing of semi-finished products by belt conveyor to counterattack crusher further broken, after the secondary crushing of stone by belt conveyor to sieve screening out the different specifications of stones, satisfy clients' demand for particle size of gravel pile by belt conveyor to finished product, The stones larger than the size of the upper screen mesh are returned to the impact crusher through the belt conveyor for re-crushing, forming a closed-circuit cycle.
|
serial number
|
name
|
type
|
power(kw)
|
number
|
|
1
|
vibrator feeder
|
ZSW6015
|
30
|
1
|
|
2
|
jaw crusher
|
CJ4255
|
200
|
1
|
|
3
|
hanging feeder
|
GZG100-4
|
2x2X1.1
|
2
|
|
4
|
impact crusher
|
CHS5979
|
2x440
|
2
|
|
5
|
vibrating screen
|
4YKD3060
|
2x30x2
|
2
|
| serial number | breadth(mm) | length(m) | angle(°) | power(kw) |
| 1# | 1200 | 27 | 16 | 30 |
| 2# | 1200 | 10+27 | 16 | 37 |
| 3/4# | 1200 | 24 | 16 | 22 |
| 5# | 800 | 20 | 16 | 11 |
| 6-9# | 650 (four) | 15 | 16 | 7.5x4 |
| 10# | 650 | 15 | 16 | 7.5 |
| P1-P4# | 650 | 10 | 0 | 5.5 |
Note: This process is for reference only, all the parameters in the figure do not represent the actual parameters, the final result will be different according to different characteristics of stone.
Technical description
1. This process is designed according to the parameters provided by the customer. This flow chart is for reference only.
2. The actual construction should be adjusted according to the terrain.
3. The mud content of the material cannot exceed 10%, and the mud content will have an important impact on the output, equipment and process.
4. SANME can provide technological process plans and technical support according to the actual requirements of customers, and can also design non-standard supporting components according to the actual installation conditions of customers.
