DSJ Series Drying Hammer Mills – SANME

DSJ Series Drying Hammer Mills is high efficiency and low energy consumption. It has the function of breaking up and crushing the materials while drying them. The rotary totor breaks up the materials, hot blast dries them, and air flow takes the crushed and dryed materials into separation chamber.

CAPACITY : 20-160t/h
MAX FEEDING SIZE : ≤100mm
RAW MATERIALS : gypsum, chalk, clay, slurry, filtered cake, etc.
APPLICATION: It can break up, dry and calcine industrial byproduct plaster, flue gas desulfurized gypsum.

CONTACT NOW

Introduction

Display

Features

Data

Product Tags

Product Dispaly

DSJ SERIES DRYING HAMMER MILL BRIEF INTRODUCTION

In gypsum board industry, the rotor on DSJ Series Drying Hammer crusher can break up and throw the desulfurized gypsum slag, whose water content is no more than 28%. During this process, the gypsum slag exchanges the heat with the intake hot air of 550°C, and then the max water content of the material is 1%, which goes into riser from outlet duct and then hot air takes the material into the next process. This machine can also be used to dry and crush filtered cake in cement industry and calcium carbide slag in environmental protection.

DSJ Series Drying Hammer crusher adopt reasonable and reliable process technology, high-quality material and advanced automated processing equipment which ensures the reliable and steady operation, and convenient maintenance. Each environmental indicators of this equipment are in line with the requirements of the country.

Desulfurized gypsum slag used to be processed through the landfill, which seriously pollutes the environment and uses the farmland. Nowadays, the desulfurized gypsum slag can be used as construction gypsum powder after being processed by this machine. What's more, its performance is better than that of natural gypsum. It is high-quality raw material to produce gypsum board.

Product Data

Technical Data of DSJ Series Drying Hammer Mills:

Model	Max Feed Size(mm)	Capacity(t/h)	Water content of feed material	Motor Power(kw)	Weight(t)
DSJ1515	≤100	20-25	≤15%	75	29
DSJ2015	≤100	30-35	≤15%	132	40
DSJ2020	≤100	35-40	≤15%	132	45.5
DSJ2515	≤100	40-50	≤15%	160	55
DSJ2817	≤100	65-80	≤15%	315	78
DSJ3026	≤100	110	≤15%	600	128
DSJ4325	≤100	150-160	≤15%	800	145

The production capacity of the listed crusher is based on the measurement results of instantaneous sampling of medium hardness materials. The above data are for reference only, please contact our engineers for equipment selection of specific project.